Standard Arm Supports; Adjustable Arm Supports; Tray; Canopy Adapter - Otto Bock Kimba Neo Instructions For Use Manual

Hook-and-loop foot straps can also be added for the forefoot area.
62

6.4 Standard arm supports

For attachment using the push lock, please see the instructions for use (user).

6.5 Adjustable arm supports

INFORMATION
► To adjust the height and depth of the arm support, please see the instructions for use (user).
They are mounted on the lateral slotted holes of the hip supports:
1) Lift the cover on the hip support.
2) Loosen and remove the screws in the slotted holes of the hip support (see fig. 63, item 1).
3) Guide the arm support holder down through the slit in the cover (see fig. 64, item 1).
4) Put the screws through the slotted holes in the arm support holder and hip support, and tighten them (see
fig. 64, item 2).
5) Mount the second arm support at the same height.
63

6.6 Tray

For mounting the tray with the user seated, please see the instructions for use (user).

6.7 Canopy adapter

INFORMATION
► The canopy adapter is required to mount the canopy on the seating unit. For information on mounting and
removing the canopy, see the instructions for use (user).
► Before installing the canopy adapter, all components have to be removed from the frame tubes of the back
support insert (back support pads, existing support pads). For information on mounting and removing the
back support pad, see the instructions for use (user).
If the canopy adapter was included, it is installed as follows:
1) Remove the back support pad and support pads from the frame tubes of the back support insert.
Kimba Neo
64
Installing options/accessories
27