Four-Point Belt - Otto Bock Kimba Neo Instructions For Use Manual

6.2.3 Four-point belt

32
1 Clips with rivet
2 Shoulder straps, left and right
3 Belt pads
4 Lap belt
Mounting the four-point belt
1) Rivet the clips (see fig. 32, no. 1) in the bore holes of the back support frame (see fig. 33, no. 2).
2) Thread the shoulder straps (see fig. 32, no. 2) through the back support pad and back support (see fig. 34).
3) Attach the shoulder straps in the clips (see fig. 33, no. 1).
4) If necessary, cut off protruding belt ends of the shoulder straps and seal the loose ends by applying heat (e. g.
with a lighter).
5) Mount the lap belt (see fig. 32, no. 4) (see Page 13).
→ If the buckle (see fig. 32, no. 7) can be closed when it lies in the centre of the seat, the four-point belt has been
mounted properly.
Kimba Neo
Installing options/accessories
5 Plastic loop
6 Belt buckle
7 Belt buckle with release button
17