Abductor; Abductor With Abductor Extension - Otto Bock Kimba Neo Instructions For Use Manual

6.3.2 Abductor

1) Place the abductor in the desired position on the seat plate (see fig. 44, item 1) and fasten it loosely with
screws from below (see fig. 45, item 1).
INFORMATION: When using a slip sack, make a cut in it in the specified spot (see Page 28), insert the
slip sack and loosely fasten the abductor with screws.
2) Adjust the depth of the abductor in the slotted hole if necessary.
3) Now fasten the abductor with screws.
44

6.3.3 Abductor with abductor extension

To mount the pommel somewhat further to the front of the seat on the size 1 seating unit, the supplied pommel
extension can be installed:
1) Screw the pommel extension loosely to the bottom of the pommel (see fig. 46, item 1).
2) Position the pommel extension on the seat plate and screw it on from below (see fig. 47, item 1).
INFORMATION: When using a slip sack, make a cut in it in the specified spot (see Page 28), insert the
slip sack and fasten the pommel with screws.
3) Adjust the depth of the pommel if necessary (see fig. 46, arrow).
4) Screw the pommel extension and pommel together firmly.
46
Kimba Neo
45
47
Installing options/accessories
21