Removing And Attaching The Leg Supports - Otto Bock Start M4 XXL Instructions For Use Manual

Use
2) Remove the calf strap from the frame tube.
14

7.3.3 Removing and attaching the leg supports

Removing the "segmented, angle-adjustable" leg support
1) Fold the foot plate up.
2) Push the pan bar of the leg support back and down (see fig. 16, item 1).
3) Swing the leg support outwards and to the side by 90° (see fig. 17, item 1) and pull up to detach (see fig. 17,
item 2).
Mounting the "angle-adjustable" leg support
1) Hold the leg support out to the side by 90° and insert the pivot bearing into the leg support retainer (see
fig. 17, item 2).
2) Swing the leg support into the direction of travel until it engages.
3) Fold the foot plate down.
16
Removing the "elevating" leg support/amputation leg support
1) Activate the release lever (see fig. 18, item 1).
2) Swing the leg support outwards and to the side by 90° (see fig. 18, item 2) and pull up to detach.
Mounting the "elevating" leg support/amputation leg support
1) Hold the leg support out to the side by 90° and insert the pivot bearing into the leg support retainer (see
fig. 19, item 1).
2) Swing the leg support into the direction of travel until it engages (see fig. 18, item 2).
18
15
17
Start M4 XXL, Start M6 Junior