Adjusting The Leg Support Angle; Further Settings - Otto Bock Kimba Neo Instructions For Use Manual

Settings
91
93

7.5.2 Adjusting the leg support angle

1) Loosen the fastening nuts in the slotted holes of the leg support (see fig. 94, no. 1).
2) Align the wide slots of the locking bushings perpendicular to the slotted holes (see fig. 95, no. 1). This allows
the leg support to engage without wear.
3) Slide the locking bushings in the slotted holes evenly on both sides (see fig. 95, see arrow) to set the desired
angle.
4) Tighten the mounting nuts (see fig. 94, no. 1).
94

7.5.3 Further settings

The following adjustment tasks are described in more detail in the included instructions for use (user):
• Adjusting the knee angle
38
92
95
Kimba Neo