Otto Bock Kimba Neo Instructions For Use Manual page 8

Preparing the product for use
1
b) Attaching the seating unit
1) First place the seating unit on the rear tube of the seat adapter at an angle of approximately 45° (see fig. 3).
2) Press the front edge of the seating unit onto the mobility base until the retaining claw audibly snaps onto the
front tube of the seat adapter (see fig. 4).
3) Slide the seat lock to the left to engage it; the green symbol indicates that the seating unit is locked (see fig. 5,
no. 1).
4) Check that the seating unit and the mobility base are securely connected. Do this by pulling back the back sup­
port.
→ The seating unit must remain firmly on the mobility base.
c) Removing the seating unit
For information about removing the seating unit, please see the instructions for use (user) (section "Remov­
ing/attaching the seating unit").
3
5
8
2
4
Kimba Neo