Adjusting The Seat Width; Adjusting The Back Support Height - Otto Bock Kimba Neo Instructions For Use Manual

Settings
76
78

7.2.2 Adjusting the seat width

1) Loosen the wing nuts on the underside of the seat (see fig. 79, item 1).
2) Adjust the seat width by moving the hip supports (see fig. 80). Abducted settings are possible as well.
3) Firmly tighten the wing nuts.
79

7.2.3 Adjusting the back support height

1) Loosen the set screws on the back support tubes (see fig. 81, item 1).
2) If necessary: Loosen the thoracic supports. Loosen the wing nuts to do so.
3) Slide the back support tubes evenly to the desired height.
4) If necessary: Firmly reinstall the thoracic supports.
5)
6) Tighten the set screws.
32
77
80
Kimba Neo