Positioning Belts; Delivery; Final Inspection; Handing Over The Product - Otto Bock Kimba Neo Instructions For Use Manual

7.6 Positioning belts

CAUTION
Incorrect belt settings
Injuries, malpositions, user discomfort due to incorrect routing of positioning belts
► The positioning belts must be positioned close to the body. They must never be held away from the user's
body by components of the product or other parts.
► Firmly tighten the positioning belts after they are applied. However, the comfort of the user must be taken into
consideration:
→ Excessively tight adjustment may lead to unnecessary pain or suffering for the user.
→ Adjusting the belt straps too loosely can cause them to shift up or down so that the user can slide into a
position that is dangerous to him/her.
→ The belt straps must not be twisted but must lie flat on the user's body.
► The shoulder belt must run over the user's shoulder. If this is not possible, the user must not be transported in
this position in a motor vehicle.
The following adjustment tasks are described in more detail in the included instructions for use (user):
• Adjusting the lap belt
• Adjusting the four-point lap belt
• Adjusting the four-point belt
• Adjusting the five-point belt

8 Delivery

8.1 Final inspection

• Are all options installed according to the order form?
• Are all screws firmly tightened and all hook-and-loop fasteners firmly fastened?
• Are the legrests/armrests (option) adjusted correctly?

8.2 Handing over the product

WARNING
Lack of instruction
Tipping over, falling of the user due to lack of knowledge
► Instruct the user or the attendant in the proper use of the product when handing it over.
The following steps must be performed for the safe delivery of the product:
• Conduct a sitting test with the user of the product. Pay special attention to proper positioning according to
medical considerations.
• Instruct the user and attendants in the safe use of the product. Use the enclosed instructions for use (user) for
this purpose.
• The instructions for use (user) must be given to the attendant upon delivery of the seating unit.
Depending on equipment: The supplied instructions for use for accessories have to be handed over in addi­
•
tion.

9 Maintenance and repair

The manufacturer recommends regular maintenance of the product every 12 months.
Further information on caring for the product and on maintenance/repair can be found in the instructions for use
(user).
Detailed information on repairs can be found in the service manual.

10 Disposal

10.1 Disposal information

All components of the product must be disposed of properly in accordance with the respective national environ­
mental regulations.
Kimba Neo
Delivery
39