Appendices; Required Tools; Torque Values Of The Screw Connections - Otto Bock Kimba Neo Instructions For Use Manual

Kimba Neo seating unit
5) 6)
Max. user weight [kg]
Max. user weight for use in vehicles for transporting
persons with reduced mobility [kg]
Weight [kg]
Folding size with hip supports (L x W x H) [mm]
1) From 140 mm with seat depth reducer option.
2) With seat depth reducer option: 80°–160°.
3) With back support angle limiter option: 80°–130°.
4) May be limited by the push bar setting on the Kimba Home mobility base (470G71=900* Kimba).
5) Please note: The maximum user weight for the seating unit depends on the maximum load for the mobility base
that is being used. If the maximum user weight for the seating unit plus its own weight is greater than the maximum
load for the mobility base, the maximum allowable user weight for the seating unit is reduced accordingly.
6)
For the combination of Kimba Neo outdoor mobility base with the Kimba Neo seating unit, the following applies:
Maximum user weight of the seating unit (40 kg) plus the weight of the seating unit itself (7 kg, for
•
size 1) = 47 kg
Maximum load for the outdoor mobility base (55 kg) minus the maximum user weight for the seating
•
unit and the weight of the seating unit itself (47 kg) = 8 kg, which remains available for additional accessor­
ies and the weight in the storage bag
7) When using the "angle-adjustable leg support for short lower leg lengths", a maximum user weight of 35 kg
applies.
8)
Follow the instructions in the section "Use in vehicles for transporting persons with reduced mobility".
Ambient conditions
Temperatures and relative humidity
Temperature during use [°C (°F)]
Transport and storage temperature [°C (°F)]
Relative humidity [%]

13 Appendices

13.1 Required tools

The following tools are required for adjustments and maintenance work:
• Allen wrenches in sizes 2.5 – 6 (sizes 3 – 6 included in 481C08=ST010 tool kit)
• Ring and open-ended spanners in sizes 8 – 12
• Rivet gun (for rivets up to ø 5 mm)

13.2 Torque values of the screw connections

Unless otherwise specified, hand-tighten screw connections.
Kimba Neo
Size 1
7)
40
40 7)
8)
7
580 x 370 x 420
Size 2
40
40
8.5
590 x 430 x 580
-10 to +40 (14 to 104)
-10 to +40 (14 to 104)
10 to 85; non-condensing
Appendices
41