Installing The Arm Supports/Forearm Supports - Otto Bock Start M2S Instructions For Use Manual

4) Press in the pushbutton and allow the side panel to engage in the adapter (see fig. 49).
48
Adjusting the forearm support height – side panel with height-adjustable forearm support
The armrest height can be adjusted by changing the positions of the spacers (see fig. 50).
1) Remove both Allen head screws (see fig. 51).
2) Remove the armrest and position the spacers as required (see fig. 52; see fig. 53).
3) Lay the armrest onto the spacers.
4) Insert and tighten the two Allen head screws (see fig. 52; see fig. 53).
50
52
Adjusting the forearm support height – side panel with height-adjustable forearm support
The user can perform the adjustment (see the section "Use" in the instructions for use (user)).

6.10 Installing the arm supports/forearm supports

Alternatively, the installed arm supports can be replaced with forearm supports/hand supports.
1) Pre-install the forearm support/hand support using the connection piece (DSC_5318.dng, item 1).
Start M2S, Start M2
49
51
53
Settings
23