Otto Bock Kimba Neo Instructions For Use Manual page 19

3) Attach the shoulder straps in the clips at the rear (see fig. 33, no. 1).
b) Mounting lap belts
1) Mount the loose strap guide on the right (see fig. 35, no. 4) (see Page 12).
2) Thread the right lap belt (see fig. 35, no. 5) through the connection piece to the rear between the seat and
back support.
3) Thread the right lap belt through the strap guide and let it hang down (see fig. 36).
4) Thread the left lap belt (see fig. 35, no. 5) through the connection piece to the rear between the seat and back
support.
5) Mount the fixed strap guide (see fig. 35, no. 6) (see Page 12).
6) Guide the right lap belt through the plastic loop (see fig. 35, no. 7).
7) Press the buckle on the left end of the lap belt together (see fig. 35, no. 8) and thread the right lap belt (see
fig. 35, no. 5) through the buckle behind the seat (see fig. 37, see fig. 38, see fig. 39).
INFORMATION: Make sure not to push the plastic part beyond the guide in the metal part.
8) Finally, thread the right lap belt through the plastic loop again.
36
38
c) Mounting the crotch belt
1) Thread the crotch belt (see fig. 35, no. 9) with the proper side through the front slot of the seat plate (see
fig. 40, no. 1).
2) Thread the crotch belt twice through the stop plate (see fig. 35, no. 10) and back up through the seat plate
(see fig. 40, no. 2).
3) Thread the crotch belt through the adjustment clasp again (see fig. 41, no. 1).
Kimba Neo
37
39
Installing options/accessories
19