EasyDrive CV3100 Series Instruction Manual page 72

CV3100 series and MINI series high performance general purpose inverter instruction manual
1
1
1
Note：
This feature is very useful for the occasions asking for real-time switching to
frequency channel. If there not only requires voltage setting, but also current setting,
the dynamic switching can be realized through compounding of multi-functional
terminal "100" and "101‖. Of course, it can also be achieved directly through the
definition of "frequency switching to AI2" multi-functional terminal.
P0.02 Digit frequency setting
Setting range
LED single digit
0：When the inverter is power off, setting frequency will be stored into Parameter
P0.03, when power on, the value will resume automatically.
1：When inverter is power off, original setting value of frequency will lose, when
power on, inverter will run from 0.0Hz.
LED tens digit
0：Stop setting frequency holds on.
1：Setting frequency will renew to P0.03 when inverter stops.
Note：
LED single digit setting only available when P0.01=1、2、3.
LED tens digit setting only available when P0.01=2、3. When P0.01=1 (Digital
setting 1)，always default as holding of setting frequency at stop.
P0.03 Operating frequency digit setting
Setting range
0
1
1
Table 6-1
00-11
0.00-Upper limit frequency
6-4
1 AI2 analog signal setting
0 Terminal pulse setting
1 Compounding setting
Factory setting
Factory setting
00
0