EasyDrive CV3100 Series Instruction Manual page 105

CV3100 series and MINI series high performance general purpose inverter instruction manual
Note：
Usually AI2 is used for current signal input, if special need, it also can be used for
voltage signal input by choosing jumper terminal JP1. The mathematical relationship
between can refer to 20mA=10.0V
P5.04 Pulse input frequency of lower limit
Setting range
P5.05 Pulse input frequency of upper limit
Setting range
The above parameters define the frequency range of exterior pulse.
P5.06 Setting frequency to minimum input
Setting range
P5.07 Setting frequency to maximum input
Setting range
The above parameters are used for setting the corresponding relation between external
analog input quantities and setting frequency, the relationship between frequency set
signal after dealing with filter and gain with setting frequency shown as Diagram 6-19;
both voltage signal and current analog can realize positive or negative action
characteristics individually. Note: Fmax and Fmin separately correspond to the max
analog input frequency and min analog input frequency.
Fmax
Fmin
Min analog input
Diagram 6-19 The max & min analog input corresponding setting frequency
0.0—P5.05
P5.04—20.0KHz
0.0Hz—upper limit frequency
0.0Hz—upper limit frequency
Fmax
Fmin
Max analog input
6-37
Factory setting
Factory setting
Factory setting
Factory setting
Min analog input Max analog input
0.0kHz
10.0kHz
0.00Hz
50.00Hz