EasyDrive CV3100 Series Instruction Manual page 6

CV3100 series and MINI series high performance general purpose inverter instruction manual
responsibility is borne by user)
5. Please never touch output terminal directly, connect inverter output
terminal to enclosure, or give the short connection among output
terminals.
Otherwise, danger of electric shock and short circuit would be caused.
1. Please make sure that AC main circuit power supply is identical with
the rated voltage of inverter.
Otherwise, danger of injury and fire would be caused.
2. Never conduct withstand voltage test for inverter.
Otherwise, damage of semiconducting elements would be caused.
3. Please connect the braking resistor or braking unit according to
diagram.
Otherwise, danger of fire would be caused
4. Please fasten the terminal by the screwdriver with specified torque.
Otherwise, danger of fire would be caused.
5. Never connect the input power line to terminals U, V, W.
Such that, the voltage is applied to output terminal, the inner of inverter
would be damaged.
6. Never connect the phase-shift capacitor and LC/RC noise filter to
output circuit.
Otherwise, the inverter inner would be damaged.
7. Never connect electromagnetic switch and electromagnetic contactor
to output circuit.
When When the inverter is running with the load, the surge current caused by
operation of electromagnetic switch and electromagnetic contactor would
cause over current protection circuit operation of inverter.
Warning
1-3