Harmonized Standards; Applied Standards - ROBOTIQ PALLETIZING SOLUTION AX Series Instruction Manual

11. Harmonized Standards

11.1. Applied Standards

This section describes all applied harmonized standards for the design and production of the Robotiq Palletizing Solution and the
AirPick Vacuum Gripper. For more information on the standards used for each individual product, please refer to their respective
declaration of conformity.
Caution
Compliance of the product is only met if all instructions of the current user manual are followed, which include, but are not
limited to, appropriate installation, compliance with safety measures, and normal usage. A risk assessment specific to the
user's final application must also be carried out.
The following standards have been applied:
ISO 12100 2010
ISO 9409-1 2004
ISO 4414 2010
IEC 61000-6-
2016
2
IEC 61000-6-
2018
4
EN 60204-1 2018
Safety of machinery — General principles for design — Risk assessment and risk reduction
Manipulating industrial robots – Mechanical interfaces – Part 1: Plates
Pneumatic fluid power – General rules and safety requirements for systems and their
components
Generic standards – Immunity standard for industrial environments
Generic standards – Emission standard for industrial environments
Safety of machinery – Electrical equipment of machines – Part 1: General requirements
Palletizing Solution - Instruction Manual