HYRobotics TSa-200SI User Manual page 84

4. Operation
(3) Mold Manager
Select , Create and Delete Mold File.
(4) Each Button Function in Mold Manager screen
NO Button
Open Mold File.
Select 0 file can create any motion pattern and mode which can be created
by user and move to New Mold screen and save with Mold Number and
1 name.
1~6 : Basic Motion Pattern which is in system.
7~99: User can create motion pattern.
2 Move to Manual Mode.
Move to Delete screen for file with '>'
3
64 TSα Series User Manual
MoldMgr
>00 FREE MODE
01 RUN_L
02 RUN_U
Mold Number can use only 2 Number, Mold Name can use 8
Character with Number
30
Description