Stop Operation - HYRobotics TSa-200SI User Manual

3.3 Stop Operation

AutoMod 03
>Down
Kick
ChuckOn
Manual 30
◀30%▶
Follow the next step to stop the robot. Power off and Disconnect air.
STEP 1
0
Press
It will stop the operation after finish to run last step. And moves to
Manual Mode.
It will not stop in the middle of step . If robot runs any step, it will
0
finish the step and stop before next step. ( Due to Pneumatic
Operation Pressure )
Turn Off Handy Controller, Power off Molding Machine.
STEP 2
Turn Off Power
STEP 3
Disconnect Air Pressure.
for Manual Mode.
3. Start up/Stop
TSα Series User Manual 25