Vacuum Verification Sensor Adjustment - HYRobotics TSa-200SI User Manual

2. Before Operation

2.1.2 Vacuum Verification Sensor Adjustment

[Main Arm Up/Down]
Vacuum Sensitivity Adjustment ( Normally not required )
P 1
P 2
P 1
P 2
P 1
P 2
P 1
P 2
P 1
P 2
P 1
P 2
12 TSα Series User Manual
k P a
Press
P1 will blink.
k P a
Press
k P a
Press
Set up finished, and LED will display current Vacuum
pressure.
k P a
Lock and Unlock for Vacuum Sensor value
Locking Vacuum Sensor Value will prevent setup value
from changing by any mistake
k P a
Press
and Sensor will lock.
k P a
Press
and sensor will unlock.
Set Button
P 1
P 2
Digital Display
STEP 1
and at the same time
STEP 2
or , set pressure -60(kpa) .
STEP 3
more than 1 seconds.
more than 3 seconds. "PL" will blink twice
more than 3 seconds "PA" will blink twice
k P a
Mode Selection