HYRobotics TSa-200SI User Manual page 8

If the following items are contained to the air, do not use it. Use only clean air.
Acid
Organic solvents
Chlorine gas
Sulfur dioxide
Compressor oil
Do not drop or give any strong shock the the handy controller. It may be cause of
malfunction.
Handle with care with pneumatic line. It may be cause of leaks.
Make sure the operation environment (Motion area, Safety Guard) should be proper for
operation of machine equipments.
Operate the robot with only healthy , good and normal body and mental condition.
Do not use handy teach palm pendant (Controller) which contact with water or oil
Make sure the operating environment is as follows
Operation Temperature : 0℃ ~+40℃ (32℉ ~+104℉)
Storage Temperature : –25℃ ~+55℃ (-13℉ ~ +131℉)
Humidity : 35 % RH ~85 % RH (without condensation ).
vi
!
CAUTION