Service Configuration; Selecting A Service; Setting Up A Service; Setting Up A Tv Service - TANDBERG TT-1222 Reference Manual

4.4

Service Configuration

4.4.1

Selecting a Service

Setting Up a Service

Each transport stream may contain a multitude of services and types. The
TV service and Audio 2 service menus, located in the Setup menu, allows the
user to select the services to be decoded.

Setting Up a TV Service

Table 4.1: Selecting a TV Service
Step
1.
2.
3.
4.
5.

Setting Up a TV Language

Some services may contain several audio, Teletext and subtitling
components, being sent in different languages. To enable the Decoder to
identify which one of these components to use, it is important to edit the
information in the TV service menu.
Table 4.2: Selecting a TV Language
Step
1.
2.
3.
4.
If the Decoder is not able to find the language described in the TV service
menu, the first component for each type in the PMT is selected for
decoding.
Reference Guide: TT1222 4:2:0 Professional Receiver
ST.RE.TT1222.2
Action
Go to the TV service menu, located under the
setup menu.
Repeat pressing the up and down arrows, until
the selected service is displayed. If Service names
do not exist for the chosen TS, continue to item 4.
Pressing right will select the displayed service.
It is also possible to select service based on
service ID. Keep on scrolling up until the display
read "Service ID > xxxx".
By pressing right once, the keypad enters edit
mode, and keying in the SID is now possible.
Action
Go to the TV service menu, located under the
Setup menu.
Repeat pressing the up arrow, until you are on the
top line
Press right to enter edit mode, and key in the
desired ISO 639 language code.
Continue in the same fashion for the Teletext and
subtitling components.
Operating the Equipment Locally
Result
The display will read "SET: TV SERVICE" on the top line.
The second line will scroll between all the services
available in the transport stream.
A small check mark is displayed in front of the service,
indicating that it is selected.
This enables you to select services that are not named in
the SDT.
After entering the SID and leaving edit mode, the correct
service is chosen and saved.
Result
The display will read "SET: TV SERVICE" on the top line.
The third line will display "aud lang.: xxx"
Upon leaving the menu, the Decoder will choose the audio
stream in the service with the associated language (if
available).
Upon leaving the individual menus, the Decoder will
choose the Teletext and subtitling stream in the service
with the associated language (if available).
Page 4-5