1.1
Scope of This Reference Guide
1.1.1
Who Should Use This Reference Guide
This Reference Guide is written for operators/users of the TANDBERG
TT1222 Professional Receiver. It describes the unit's functions and
operation. The Reference Guide is written to assist in the installation and
day-to-day care and operation of the unit. It does not include any
maintenance information or procedures which would require the removal
of covers.
DO NOT REMOVE THE COVERS OF THIS EQUIPMENT. HAZARDOUS VOLTAGES ARE PRESENT
WITHIN THIS EQUIPMENT AND MAY BE EXPOSED IF THE COVERS ARE REMOVED. ONLY
TANDBERG TELEVISION TRAINED AND APPROVED SERVICE ENGINEERS ARE PERMITTED TO
Unauthorised maintenance or the use of non-approved replacements may affect the equipment
1.1.2
What Equipment is Covered by This Reference Guide
The base model of the TT1222 Receiver comprises of an enclosure and
Base Board only.
Figure 1.1: Front View
There are a number of option modules which can be added to the base
unit to provide additional inputs and outputs. Information regarding the
option modules can be found in Chapter 3, Options.
Table 1.1: Equipment Model Descriptions
Model Number
TT1222 Receiver
1.1.3
Software Version
This Reference Guide has been written to cover the functionality of
software version 2.0.0 (and later). The current software version can be
found in the Properties Menu.
Reference Guide: TT1222 4:2:0 Professional Receiver
ST.RE.TT1222.2
WARNING...
SERVICE THIS EQUIPMENT.
CAUTION...
specification and invalidate any warranties.
Marketing Code
Description
TT1222/CIBAS
Professional Receiver. 1U MPEG-2 4:2:0 Receiver.
Common Interface CA unit with: 2 x Composite Video Outputs, 2 x Audio
Outputs, RS-232 Data, RS-232 Remote Control, 5 x General Purpose
Outputs (GPO), 1 x Alarm Relay and 1 x Ethernet Port (for future use)
Introduction
Page 1-3