Output Connectors; Analogue Composite Video Output; Digital Video Output (Sdi, Option); Audio Output - TANDBERG TT1220 Instruction Manual

Installing the Equipment
2.6.3

Output Connectors

Analogue Composite Video Output

This is a pair
composite video output. The default output standard is
configured using the Setup ⇒ Video Format menu.

Table 2.8: Analogue Video Connector

Item
Connector type
Output format*
Connector designation
Pin: Centre
Shield
Impedance

Digital Video Output (SDI, Option)

This is a BNC socket that provides a digital video
output, optionally with embedded audio. The SDI
output is a factory fitted option. When fitted, it
replaces the second Analogue Composite Video
output connector.

Table 2.9: Digital Video Connector

Item
Connector type
Video output format
Audio output format
Connector designation
Pin: Centre
Shield
Output level
Impedance

Audio Output

The Decoder is fitted with either one or two 9-pin
D-type connectors each carrying one stereo audio
pair. If two connectors are fitted, an additional
feature is available, allowing the connectors to carry
S/PDIF digital audio or Dolby AC-3 digital and Dolby
Pro Logic analogue audio.
2 If the SDI output option is fitted, one of the Composite video output connectors is replaced with the SDI output
connector.
Page 2-12
2
of BNC sockets, which provides an analogue
Specification
2 x BNC, Female
PAL (B, D, G, H, I, Combination N, M)
SECAM (B, G, H, D, K, K1, L)
NTSC (M)
*Output format varies with menu settings and incoming MPEG data.
CVBS
Video output
Ground / Chassis
75 Ω
Specification
BNC, Female (the SDI output replaces the second CVBS output)
ANSI/SMPTE 259M
ANSI/SMPTE 272M, level AEF
SDI
Signal
Ground / Chassis
800 mV peak to peak, ±10%
75 Ω
Instruction Manual: TT1220 Professional Receivers and Decoders
ST.TM.TT1220.4