Table of Contents
Advertisement
Example
Parameter-
dialplan.digitmap.no_match_action
Description
Default Value
988
dialplan.digitmap.interdigit_short_timer = 5
If the value of the parameter 'dialplan.digitmap.string'
is set to <[2-9]x:86>3.T|0T, the IP phone will wait 5
seconds before matching the entered digits to this dial
plan and placing the call.
Distribution configuration (configure a string of positive
integers separated by "|" for each string of the digit
map in the corresponding position)
If there are more digit maps than timeout values, the
last timeout is applied to the extra digit map. If there
are more timeout values than digit maps, the extra
timeout values are ignored.
Example:
dialplan.digitmap.interdigit_short_timer =
4|5|3|6|2|1
If the value of the parameter 'dialplan.digitmap.string'
is set to <[2-9]x:86>3.T|2T|1xxT|0x.!|[2-9]11T, 4 is
applied to the "<[2-9]x:86>3.T" digit map, 5 is
applied to "2T" digit map, 3 is applied to "1xxT" digit
map, 6 is applied to "0x.!" digit map, 2 is applied to the
"[2-9]11" digit map, the last digit 1 is ignored.
Note: It works only if the value of the parameter
"dialplan.digitmap.enable" or
"account.X.dialplan.digitmap.enable" is set to 1
(Enabled). The value configured by the parameter
"account.X.dialplan.digitmap.interdigit_short_timer"
takes precedence over that configured by this
parameter.
Configuration File
<MAC>.cfg
Configures the behavior when an impossible digit map
match occurs.
0
Matrix SPARSH VP710 User Guide
Advertisement
Table of Contents
