Using The Chassis Id Prom Tool - Fujitsu PRIMERGY CX2550 M6 Upgrade And Maintenance Manual

Basic software procedures
▶ Start the ServerView RAID Manager and log in.
▶ Select the desired SAS controller.
In the General tab you can find data on the selected object including its SAS
address.
For more information, see the "ServerView Operations Manager -
Server Management" user guide and the "ServerView RAID
Manager" user guide.
▶ Inform the customer about the new SAS address. The customer need the
new SAS address, especially when the server is connected to a Fujitsu
Storage ETERNUS system.
5.2.15

Using the Chassis ID Prom Tool

Regarding the CX2550 M6 / CX2560 M6, this action is not required if the
system information restore is successfully done. For more information,
see "Verifying system information backup or restore" on page
System information like server name and model, housing type, serial number
and manufacturing data are stored on the system board.
In order to integrate your system into the ServerView management
environment and to enable server installation using the ServerView Installation
Manager, system data needs to be complete and correct.
The tool and further instructions are available to maintenance personnel from
the Fujitsu Technology Solutions Extranet:
https://partners.ts.fujitsu.com/com/service/ps/Servers/PRIMERGY/
▶ Select your PRIMERGY system from the main area of the page.
▶ From the categories selection, choose Software & Tools Documentation.
▶ In the Tools area click Tools: Chassis-IDProm Tool to download the file
(tool-chassis-Idprom-Tool.zip).
For Japan, follow the instructions provided separately.
86 Upgrade and Maintenance Manual
69.