Hue - Canon MARKLL WUX10 Command List

HUE

Hue setting
Format
HUE=<Hue setting value:Number>
GET□HUE
Setting values for <Hue setting value:Number> are -20 to 20.
Environment
Power
OFF ON
X O
Response
"i:OK" is returned if the parameter was set properly.
For '
GET HUE
'
g:HUE=<Hue setting value:Number>
For details on other responses, refer to the "Error List".
Description
(1) This sets the screen hue.
(2) This command functions in the same way as when "Image adjustment" - "Color adjustment" -
"Hue setting" are selected on the menu.
(3) If the input is neither "COMP" nor "VIDEO", 'e:200X INVALID_SOURCE(***)' is returned as
an error response.
(4) When input is "VIDEO" and signals are not input, 'e:2010 NO_SIGNAL' is returned.
(5) If numerical parameters are outside the range, "e:0801 INVALID_VALUE" is returned.
(6) This sets the currently selected input signal and image mode.
(7) The GET command can be used to retrieve the current hue. ("
Example
Setting
>HUE=8
<i:OK
Reference
>GET HUE or ?HUE
<g:HUE=1
* Commands are indicated by ">", and responses are indicated by "<".
Revision History / Date
/ ?△HUE
PM D-RGB A-RGB1 A-RGB2 COMP
X X X X
' or ' ', current hue setting is returned as
?HUE
This sets the hue to +8.
This retrieves the hue.
Changes
Projector WUX10 MarkII User Commands
Input
VIDEO HDMI
O
X
O
'
- 39 -
None
O
X
")
GET HUE
Revised by
Approved by