Hdmi_Ovscan; Hue - Canon WUX450 User Commands

HDMI_OVSCAN

HDMI overscan setting
Format
Setting Command
Response
Reference Command
Response
< HDMI overscan setting parameter:ID >
Parameter
OFF
ON
Environment
Power mode restriction
LAN
SL0 SL1 SL3 ON
No No No Yes
Remarks
(1) The setting is fixed to [OFF] depending on the setting status of other functions or the status of
the input signal.

HUE

Hue setting
Format
Setting Command
Response
Reference Command
Response
Setting values for <Hue setting value:Number> are -20 to 20.
Environment
Power mode restriction
LAN
SL0 SL1 SL3 ON
No No No Yes
Remarks
(1) This sets the currently selected input signal and image mode.
WUX450 / WX520 / WUX400ST / WX450ST User Commands
HDMI_OVSCAN=<HDMI overscan setting parameter:ID>
i:OK
GET= HDMI_OVSCAN
g: HDMI_OVSCAN=<HDMI overscan setting parameter:ID>
Note: See "Error list" for any response other than the above.
Meaning
Turns overscan to OFF
Turns overscan to ON.
RS-232C
ST ON D-RGB A-RGB COMP
No Yes No No
HUE=<Hue setting value:Number>
i:OK
GET= HUE
g: HUE=<Hue setting value:Number>
Note: See "Error list" for any response other than the above.
RS-232C
ST ON D-RGB A-RGB COMP
No Yes Yes Yes
- 37 -
Input
HDMI LAN USB
No Yes No No
Input
HDMI LAN USB
Yes Yes Yes Yes
None
Yes
None
Yes