Image - Canon WUX500ST User Commands

IMAGE

Image mode setting
Format
Setting Command
Response
Reference Command
Response
<Image mode setting parameter:ID>
Parameter
STANDARD
PRESENTATION
PHOTO_SRGB
DYNAMIC
VIDEO
USER_1
USER_2
USER_3
USER_4
USER_5
Environment
Power mode restriction
LAN
SL0 SL1 SL3 PM ON SL0 SL1 SL3 PM ON ST PM ON D-RGB A-RGB COMP HDMI HDBT LAN USB
No No No No Yes No No No No Yes No No Yes
Remarks
(1) When Image Mode setting is changed, the following set of setting items are reapplied as these
sets are unique to the individual image modes.
Example
(Setting)
>IMAGE=STANDARD
< i:OK
(Reference)
>GET=IMAGE
< g:IMAGE=STANDARD
Note: '>' indicates a command; '<' indicates a response.
IMAGE=<Image mode setting parameter:ID>
i:OK
GET= IMAGE
g: IMAGE=<Image mode setting parameter:ID>
Note: See "Error list" for any response other than the above.
Meaning
Standard
Presentation
Photo/sRGB
Dynamic
Video
User 1
User 2
User 3
User 4
User 5
WiFi RS-232C
Yes
-56-
WUX500ST User Commands
Input
Yes Yes Yes Yes Yes Yes
No
signal Yes