Digital Wrench® Diagnostic Connector; Digital Wrench® Communication Errors; Digital Wrench® Serial Number Location - Polaris Sportsman XP 1000 S 2020 Service Manual

GENERAL INFORMATION
4. Once the installation is complete, launch the Digital
Wrench® software and verify the information in the
lower, right-hand corner matches the new Base
Version you just installed.
DIGITAL WRENCH® DIAGNOSTIC
CONNECTOR
Refer to the Engine Electrical chapter for the following
information:
• Location of the Digital Wrench® diagnostic connector
• Instructions on how to connect the diagnostic
connector to the vehicle
DIGITAL WRENCH® COMMUNICATION
ERRORS
If you experience problems connecting to a vehicle, or
any other Digital Wrench® software-related problem, visit
the Digital Wrench® home page (www.polaris.diagsys.
com) and locate the following information under
Knowledge Base:
• Errors and Troubleshooting
• Frequently Asked Questions (FAQs)
• Procedures and Solutions
1.40
DIGITAL WRENCH® SERIAL NUMBER
LOCATION
To locate the Digital Wrench® serial number, do the
following:
1. Launch the Digital Wrench® software.
2. On the Digital Wrench® main screen, select the
'Configure the Diagnostic System Software' menu
icon.
3. Locate the serial number on the right side of the
System Configuration screen.
9931493 R03 - 2020-2021 Sportsman XP 1000 S Service Manual
© Copyright Polaris Inc.