Stator / Alternator; Stator / Alternator Removal - Polaris Sportsman XP 1000 S 2020 Service Manual

STATOR / ALTERNATOR

STATOR / ALTERNATOR REMOVAL

1. Remove the fuel tank. See "Fuel Tank Removal".
2. Remove the (4) screws retaining the engine skid
plate and remove the plate from the vehicle.
3. Place a drain pan under the front portion of the
engine.
4. Remove the coolant hose from the water pump
housing.
5. Slowly drain the coolant into the drain pan. Dispose
of used coolant properly.
6. Disconnect the stator wire harness and remove the
CPS from the stator cover.
7. Remove the coolant by-pass hose from the water
pump cover fitting.
9931493 R03 - 2020-2021 Sportsman XP 1000 S Service Manual
© Copyright Polaris Inc.
ENGINE ELECTRICAL
8. Remove the (8) screws retaining the stator cover.
9. Carefully remove the stator cover taking care not to
damage the plastic coolant pipe.
CAUTION
The flywheel contains powerful magnets. Use caution
when removing and installing the stator cover. DO NOT
place fingers between cover and crankcase at any time
during the removal / installation process or injury could
result.
10. Remove the stator wire guide
the cover.
4
q w
and stator from
4.29