r
3. Install the spring pins
to retain the slider pins.
4. If removed, install the rollers
u
clips
onto the spider.
5. Install the spring so the arm
the moveable sheave.
9931493 R03 - 2020-2021 Sportsman XP 1000 S Service Manual
© Copyright Polaris Inc.
t
y
, washers
and E-
i
rests into the notch in
o
6. Align the X's
on the spider and moveable sheave.
7. Install the universal clutch compressor on the clutch
and compress the helix cover.
CAUTION
The helix cover is loaded by the spring. Not using a
proper compressor may result in personal injury or
damage to the clutch.
8. Align the marks previously made on the helix cover
and moveable sheave. Install the helix/cover and the
a
four fasteners
. Torque fasteners to specification.
TORQUE
Driven Clutch Helix Fasteners
47 in-lbs (5 N·m)
9. Once back together, verify the grease / tape marks
made during disassembly are properly aligned.
10. Install the drive clutch on the vehicle.
PVT SYSTEM
6
6.29