BRAKE SYSTEM
BRAKE SWITCH REPLACEMENT
IMPORTANT
Brake fluid will leak out of the rear brake master
cylinder when the brake switch is replaced. Place a
suitable catch container / rags below the master
cylinder prior to brake switch removal.
q
w
1. Disconnect the harness
from the brake switch
.
2. Loosen and remove the brake switch.
3. Install new brake switch and torque to specification.
TORQUE
Brake Switch (Rear Brake Master Cylinder)
180 in-lbs (20 N·m)
4. Proceed to Rear Brake System Bleeding page 10.22
to complete the bleeding procedure.
10
9931493 R03 - 2020-2021 Sportsman XP 1000 S Service Manual
10.29
© Copyright Polaris Inc.