2. Disconnect the taillight from the main wiring harness
q
.
3. Remove the taillight fasteners
4. Install the NEW taillight. Torque fasteners to
specification.
TORQUE
Taillight Fasteners
Torque Until Fully Seated
5. Connect the taillight to the main wiring harness.
6. Align the rear rack with the mounting holes and
torque fasteners to specification. See Rear Rack
Installation page 11.15.
7. Verify proper operation.
9931493 R03 - 2020-2021 Sportsman XP 1000 S Service Manual
© Copyright Polaris Inc.
LICENSE PLATE LIGHT REPLACEMENT (IN-
TERNATIONAL MODELS)
1. Disconnect the license plate light electrical connector
w
and the taillight.
2. Remove the license plate light from the license plate
3. Install the new license plate light to the license plate
4. Connect the license plate light electrical connector to
BODY ELECTRICAL
q
from the main wiring harness
bracket.
bracket.
the main wiring harness.
w
.
12
12.27