Ball Joint Installation - Polaris Sportsman XP 1000 S 2020 Service Manual

STEERING / SUSPENSION
5. Tighten the Press Asm.
ball joint from the A-arm.
9.20
e
screw and fully remove the

BALL JOINT INSTALLATION

1. By hand, install the NEW ball joint into the A-arm.
2. Position the Installation Adapter
the ball joint.
NOTICE
Image for reference only.
q
3. Position the Spacer
so it is against the A-arm.
4. Install the Press Asm.
the Installation Adapter
5. Tighten the Press Asm. screw and fully install the ball
joint into the arm.
9931493 R03 - 2020-2021 Sportsman XP 1000 S Service Manual
w
over the face of
over the shaft of the ball joint
e
onto the A-arm to engage
w q
and Spacer .
© Copyright Polaris Inc.