REAR FOG LIGHT BRACKET
(INTERNATIONAL ZUG MODELS)
REAR FOG LIGHT BRACKET REMOVAL /
INSTALLATION
1. Remove the two rear fog light screws
w
the rear fog light
from the rear fog light bracket.
2. Disconnect the rear fog light electrical connector from
the back of the rear fog light.
e
3. Remove the fasteners
retaining the rear fog light
r
bracket
to the left side of the license plate bracket.
4. Reverse this procedure to reinstall the rear fog light
bracket and rear fog light. Torque fasteners to
specification.
TORQUE
Rear Fog Light Bracket Fasteners
53 in-lbs (6 N·m)
TORQUE
Rear Fog Light Screws
Torque Until Fully Seated
9931493 R03 - 2020-2021 Sportsman XP 1000 S Service Manual
© Copyright Polaris Inc.
q
and remove
BODY / FRAME
11
11.21