Polaris Sportsman XP 1000 S 2020 Service Manual page 331

y
9. Install retaining ring with sharp, square edge facing
away from U-joint into exposed groove.
u
10. Place larger adapter with ID larger than yoke bore
on side with retaining ring.
11. Tighten clamp until other cap is below retaining ring
groove.
12. Install second retaining ring
edge facing away from U-joint.
13. Verify the U-joint moves freely and does not bind.
9931493 R03 - 2020-2021 Sportsman XP 1000 S Service Manual
© Copyright Polaris Inc.
i
with sharp, square
FINAL DRIVE
8
8.19