Polaris Sportsman XP 1000 S 2020 Service Manual page 306

TRANSMISSION
8. Install the washer over the bellcrank shift shaft and
install the bellcrank by aligning the skip-tooth splines.
9. Install the retaining nut and torque to specification.
TORQUE
Bell Crank Nut
15 ft-lbs (20 N·m)
10. Install the washer and a new retaining ring onto the
cam shift shaft. The retaining ring should be tight on
the shaft.
11. Install the transmission switch, washer and snap
ring.
12. Install the detent plug and torque to specification.
TORQUE
Shift Detent Plug Fasteners
20 ft-lbs (27 N·m)
7.18
13. Assemble the input shaft and reverse shaft with the
lower shift fork and park pawl installed.
14. Place the assembly into the transmission housing
making sure to move the park pawl arm behind the
shift shaft cam during installation.
15. Lift up on the lower shift fork and rotate the end into
the cam.
9931493 R03 - 2020-2021 Sportsman XP 1000 S Service Manual
© Copyright Polaris Inc.