Polaris Sportsman XP 1000 S 2020 Service Manual page 270

PVT SYSTEM
9. While using the Clutch Holder Wrench to hold the
drive clutch, remove the drive clutch bolt and
hardware. Remove the drive clutch assembly.
Clutch Holding Wrench
9314177-A
10. Clean inner shaft taper using the Drive Clutch
Reamer. Ensure the drive clutch taper and PTO crank
nose are clean and free of chips or burrs.
Drive Clutch Reamer
PS-48587
11. Reinstall the drive clutch bolt and hardware. While
using the Clutch Holder Wrench to hold the drive
clutch, torque the drive clutch bolt to specification.
TORQUE
Drive Clutch Retaining Bolt
47 ft-lbs (64 N·m)
12. Retest for PVT creeping and/or harsh gear selector
engagement. If symptoms persist, proceed to step
13.
13. Inspect and verify the engine and transmission
mounts and isolators are not loose or damaged.
6.12
9931493 R03 - 2020-2021 Sportsman XP 1000 S Service Manual
© Copyright Polaris Inc.