Installation - Polaris Sportsman XP 1000 S 2020 Service Manual

INSTALLATION

1. Install a new spring ring on the end of the drive shaft
and apply an anti-seize compound to the splines.
2. Align the splines of the drive shaft with the front
gearcase and reinstall the drive shaft. Use a rubber
mallet to tap on the outboard end of the drive shaft if
necessary.
3. Install the drive shaft into the front bearing carrier.
4. Refer to Front Bearing Carrier Installation page 8.12
to properly reassemble the vehicle.
9931493 R03 - 2020-2021 Sportsman XP 1000 S Service Manual
© Copyright Polaris Inc.
FINAL DRIVE
8
8.15