Terminator
The 'Terminator' option is used to specify the end-of-text message and is primarily used to denote the end of the barcode value.
Code ID
The 'Code ID' option sends a specific value when a particular barcode symbology is scanned. For example, if 'Code ID' is enabled and
Code 39 is scanned, an "M" will appear in the data stream in front of the barcode value.
CR *
None
LF
CR + LF
O - MSI/Plessey T - EAN 128
S - EAN 8
E - UPC E
Code ID On
A - UPC A
F - EAN 13
L - Code 93
Code ID Off *
18
TERMINATOR/CODE ID
Tab
Space
ESC
K - Code 128
N - Codabar
D - Full ASCII Code 39
M - Std. Code 39
I - Interleaved 2 of 5
Chapter 4
*Default