Chapter 4
Start and Stop Pin
Use the Start and Stop Pin barcodes when you are prompted for a password during Bluetooth pairing. To use this setting:
1. When prompted for a password, scan the Start Pin barcode
2. Scan the appropriate numbers (provided below) for your password.
3. Scan ENTER.
4. Scan the Stop Pin barcode.
Now the Pin is set and the scanner should pair to the PC. Test the connection by scanning a barcode from WordPad, NotePad or the
equivalent and verifying the scan is correct.
Scan the numbers for your password, then scan ENTER.
CONNECTION AND SCAN OPTIONS
Start Pin
Stop Pin
ENTER
8
8