Emerson Rosemount Analytical X-STREAM X2 Series Instruction Manual page 341

Instruction Manual
HASX2E-IM-HS
10/2012
LB20
Emerson Process Management GmbH & Co. OHG
8.4 Troubleshooting on Components
LB10
LB21
LB4
LED
X-STREAM X2
Step 1:
Check the solder bridges, lo-
cated at the solder side of the
board, for proper configuration:
LB10 open
LB4 2-5 closed
LB21 1-4 closed
LB20 open
Step 2:
Switch on the analyzer.
The onboard LED will light up red
and green.
LED
When the warmup time has
elapsed, the LED flashes green.
LED
8-37