Emerson Rosemount Analytical X-STREAM X2 Series Instruction Manual page 180

X-STREAM X2
6.2.2.1 Zero calibration menu
Control..
Zero calibration..
Cancel calibration!
Start calibration!
Zero gas
CO2.1

Page 1
RESET..

Status..
CO2.1
Page 2
Note!
For further details on calibration procedures,
see chapter 7 Maintenance.
6-6
6.2 Menu System - Control menu
0.0 ppm
134.1 ppm
134.1 ppm
Multi-channel unit:
Select the channel to be calibrated in the
SELECT COMPONENT menu.
Pressing the 8 key in this line will abort the
zero calibration and cancel any changes.
Pressing the 8 key in this line will start the
zero calibration.
Current nominal zero gas concentration (zero
gas concentration can be set in the SETUP
menu 6.2.3.2.1, page 6-24)
Current measured gas concentration.
Press the 8 key in this line to enter a subme-
nu to reset the calibration parameters (
6.2.2.2.1, page 6-8)
Press the 8 key in this line to view the current
calibration status (
Current measured gas concentration.
Multi-channel unit:
Press the  key to enter the SELECT COM-
PONENT menu to change the settings for a
different channel.
Emerson Process Management GmbH & Co. OHG
Instruction Manual
HASX2E-IM-HS
10/2012
6.2.2.2.2, page 6-9)