Emerson Rosemount Analytical X-STREAM X2 Series Instruction Manual page 192

X-STREAM X2
6.2.3.1.2 Menu access setup
Setup..
Display..
Menu access..
Code 1:
Code 2:
Code 3:
Activate

Page 1
When using access codes, we
recommend NOT using the
factory-set codes.

Code 1:
Code 2:
Code 3:
Page 2
6-18
6.2 Menu System - Display setup menu
Off
Off
Off
On
00000001
00000002
00000003
If the system is set up accordingly, the access
code for level 3 must be entered to gain ac-
cess to this menu.
Lines 1 to 3 determine whether the correspon-
ding access level is locked:
Off: Menu access not locked.
On: Access code must be entered to gain
access to the corresponding menus (code 3 =
level 3, ..).
Note!
If a lower level is locked, all higher levels will
also be locked.
If a higher level is unlocked, all lower levels
will also be unlocked.
Determines how unlocked menus are re-
locked to restore security settings.
Available options:
On : all levels with active security code
are locked on return to the
measurement display
1 min: Levels are locked after 1 minute of
inactivity.
Never: Menus remain unlocked.
Note!
Executing the "Lock menus!" function in the
CONTROL menu (
all active locks.
Defines access codes for the corresponding
levels.
The illustration shows the factory settings.
Emerson Process Management GmbH & Co. OHG
Instruction Manual
HASX2E-IM-HS
10/2012
6.2.2, pg. 6-5), sets