Fig. 4-2: Labelling Of Gas Connectors (Example); Fig. 4-3: Installation In Bypass Mode - Emerson Rosemount Analytical X-STREAM X2 Series Instruction Manual

X-STREAM X2
The number of gas connections and their
configuration may vary according to analyzer
version and installed options.
All gas connectors are labelled and can be
found on the
• analyzer's rear panel (X-STREAM X2GP,
X-STREAM X2GK)
• underside of the analyzer (X-STREAM field
housings)
The analyzer should be mounted close to the
sample gas source to minimize transport time.
A sample gas pump can be used to reduce the
reaction time; this requires that the analyzer
be operated in bypass mode or fitted with
Pressure control valve
Sample gas pump
Fig. 4-3: Installation in bypass mode
4-6
4.4 Installation - Gas Connections
Filter
Should it be necessary to open the gas lines,
the gas connectors should be sealed with
PVC caps to prevent pollution by moisture,
dust, etc.
Fig. 4-2: Labelling of gas connectors (example)
a pressure control valve to protect against
excessive gas flow and pressure (Fig. 4-3).
Analyzer
Flow sensor
Emerson Process Management GmbH & Co. OHG
Instruction Manual
HASX2E-IM-HS
10/2012
Exhaust
Exhaust