Table of Contents
Advertisement
Instruction Manual
HASX2E-IM-HS
10/2012
Component selection menu
A single channel analyzer has only one
measurement channel (component): editing
any parameter will only effect this one chan-
nel.
A multi-channel analyzer requires that a
channel must be selected before its parame-
ters can be changed. When this selection is
necessary, a menu is automatically displayed;
5.4.2
Access Levels
Access levels can be used to prevent changes
to parameters by unauthorised personnel.
The X-STREAM menu system supports four
prioritized access levels which can be acti-
vated and deactivated separately, and should
be supplied with their own access codes.
Level four has the highest priority and is
used for factory settings — only qualified
EMERSON service personnel have access
to this level.
Level three allows access to system admin
parameters, e.g. for data capture and proces-
sing systems.
Level two covers the expert settings, e.g.
basic settings for calibration.
Level one is the user level and includes
parameters which should be set by trained
personnel.
Any menus not assigned to one of these levels
are not editable or are of minor relevance.
In this chapter, the descriptions of the indi-
vidual menus also indicate which level the
menus are in. These assignments cannot be
changed.
Emerson Process Management GmbH & Co. OHG
5.4 Software
it is not displayed on single-channel units.
Select component
Component:
Access codes for levels 1 to 3 can be defi-
ned, activated and deactivated by the client.
The analyzer is delivered with the following
settings:
Level
1
2
3
It is recommended to set new
access codes if they are to be
activated (
6-18).
Note!
If a lower level is locked (i.e. its code acti-
vated), all higher levels will also be locked.
If a higher level is unlocked (i.e. its code
deactivated), all lower levels will also be au-
tomatically unlocked.
X-STREAM X2
CO2.1
Back -
Access code
Status
00000001
00000002
00000003
6.2.3.1.2, page
Off
Off
Off
5-9
Advertisement
Table of Contents
Troubleshooting
