Table of Contents
Advertisement
2. Hybrid modular matrix concept
Lightware's hybrid modular matrix switchers allow building custom I/O sizes that meets
the user's requirements. Different types of input and output boards give the maximum
flexibility for rental and installation signal transmission. The hybrid architecture allows
signal routing between boards even if they have different connectors. This way any input
can be routed to any or more outputs, if the output interface is capable of transmitting the
signal. For example a DVI source can be routed to an HDMI sink, but HDCP encrypted
sources cannot be routed to non-HDCP capable DVI sinks.
Available interface types include DVI-D single- and dual-link, HDMI, fiber, and twisted pair
cables as well.
2.1. Router frames
Different frame sizes are available from 9x9 up to 80x80. To fit user needs various input
and output interface boards are available, that can be mixed in the same frame without
limitation.
Frame type
MX-FR9
MX-FR17
MX-FR33
MX-FR33L
MX-FR33R
MX-FR65R
MX-FR80R
Info: The maximum number of input and output ports includes the Test input and Preview
output port of the MX-CPU2 processor board.
2.1.1. MX-CPU2 processor board
In order for the router frames to work, a CPU board is needed. This board is responsible
for controlling the matrix and storing the settings.
Test input and Preview output ports
The MX-CPU2 board has a "TEST" DVI input, and a "PREVIEW" DVI output port.
Although these ports have special functions they can be used as normal I/O ports as well.
These ports are HDMI and HDCP capable.
MX-FR80R and MX-FR65R
Used in the MX-FR80R (and MX-FR65R) router frame, the Preview output is directly
connected to the 80
the same signal as the 80
The 80
port of the 10
selected port (Test input or Input board #10) will be available as the 80
crosspoint switch.
Other frames
All other frames use the Test input and Preview output just like any other ports. These
ports are referred as the last port in the crosspoint.
Page 12 / 137
Rack
Max. input
height
boards
4U
4U
5U
6U
7U
15U
15U
10
th
output port with a DVI splitter. Therefore this port always outputs
th
output, even if it uses a different interface (TP, OPT, etc.).
th
input port of the crosspoint is multiplexed between the Test input port and the 8
th
input board. This switch is independent from the crosspoint state. The
Max. input
ports
1
9
2
17
4
33
4
33
4
33
8
65
80
Section 2. Hybrid modular matrix concept
Max. output
Max. output
boards
ports
1
9
2
17
4
33
4
33
4
33
8
65
10
80
th
input on the
th
Advertisement
Table of Contents
