Lightware MX-FR9 User Manual page 50

The 'Add-on source' setting is accessible only with MXD-
UMX-IB. The analog stereo and S/PDIF conversion
functions can be set here. Two signal conversions are
shown. 'S' represents the S/PDIF port, 'An' represents the
analog stereo port and 'D' represents the digital audio
which is embedded in the HDMI signal on the video port.
Possible options are shown below:
LCD legend
An->D;An->S
An->D;D->S
D->An;S->D
S->D;S->An
D->S;D->An
The 'Analog audio Input' submenu contains settings like
volume, balance, etc. for the analog stereo audio port
when it is configured as input.
Accessible only with MXD-UMX-IB.
The 'Analog audio Output' submenu contains settings like
volume, balance, etc. for the analog stereo audio port
when it is configured as output.
Accessible only with MXD-UMX-IB.
Input port settings submenu (DVIDL type)
Covered boards: MX-DVIDL-IB
The input cable equalization can be set to 3, 9, 25, 35, 40
dB, or Auto. Use the left ◄ and right ► buttons to
change the value.
Input port settings submenu ('3G-SDI' type)
Covered boards: MX-3GSDI-IB
Use the up ▲ and down ▼ buttons to select the
parameter to be changed. Use the left ◄ and right ►
buttons to change the value.
The 'Equalization' can be set to 'Auto' (recommended) or
'0 dB'. The later setting disables equalization.
The 'Audio source' selects which is embedded to the
forwarded HDMI signal can be set to 'SDI', 'S/PDIF' or
'No
Page 50 / 137
Connections
HDMI deembedded
from input port
HDMI deembedded
from input port
HDMI deembedded
from input port
HDMI deembedded
from input port
HDMI deembedded
from input port
Input 2 settings
~Add-On Source
~ An->D;An->S
Analog Audio Input
HDMI embedded
to crosspoint
S/PDIF Analog
HDMI embedded
to crosspoint
S/PDIF Analog
HDMI embedded
to crosspoint
S/PDIF Analog
HDMI embedded
to crosspoint
S/PDIF Analog
HDMI embedded
to crosspoint
S/PDIF Analog
Input 2 settings
Add-On Source
An->D;An->S
~Analog Audio Inpu>>
Input 2 settings
An->D;An->S
Analog Audio Input
~Analog Audio Outp>>
~ An->D;An->S
Analog Audio Input
Input 9 settings
~Equalization
~< 9dB
Input 17 settings
~Equalization
~<Auto
Audio source
Input 17 settings
~Audio source
audio'.
~<SDI
Video mode
~
~
~
~
>~
~
>~
~
>~
Section 5. Operation