Table of Contents
Advertisement
Legend:
Explanation: The router has a fix IP address 192.168.2.106 on the 255.255.0.0 subnet
with a gateway on 192.168.2.1 and communicates over TCP port 10001.
8.5.2. Reload factory default IP settings
Description: This command sets the router to the factory default IP setup.
Command {IP_CONFIG=!}
Response (Changing●IP●
Parameters after successful command execution:
Info: This command can be used on all control interfaces (LAN, RS-232 and USB) but the
'(DONE!)' response cannot be seen on LAN because the connection is dropped just after
the '(Changing IP configuration...)' response.
Info: Factory default setting can be reloaded by the front panel buttons (section Error!
Reference source not found.) or on the front panel LCD menu as well.
8.5.3. Enable DHCP IP setting
Description: After sending this command the router will inquire IP address with DHCP.
Command {IP_CONFIG=D}
Response (Changing●IP●
Parameters after successful command execution:
Info: This command can be used on all control interfaces (LAN, RS-232 and USB) but the
'(DONE!)' response cannot be seen on LAN because the connection is dropped just after
the '(Changing IP configuration...)' response.
Info: DHCP setting can be reloaded by the front panel buttons as well (section Error!
Reference source not found.) or on the front panel LCD menu as well.
Section 8. Programmer's reference
Identifier
<id>
0: fix IP
<ip_address>
IP address
<port>
TCP/IP port
<mask>
subnet mask
<gateway>
gateway address
Format
configuration...)CrLf
(DONE!)CrLf
(FAILED!)CrLf
Parameter
IP address
port number
Subnet mask
Gateway
Format
configuration...)CrLf
(DONE!)CrLf
(FAILED!)CrLf
Parameter
IP address
port number
Subnet mask
Gateway
Description
Default value
2: DHCP
0
192.168.254.254
10001
255.255.0.0
0.0.0.0
→ {IP_CONFIG=!}
← (Changing IP configuration...)CrLf
← (DONE!)CrLf
or
Value
192.168.254.254
10001
255.255.0.0
0.0.0.0
→ {IP_CONFIG=D}
← (Changing IP configuration...)CrLf
or
(DONE!)CrLf
Value
Acquired with DHCP
unchanged
Acquired with DHCP
Acquired with DHCP
MX-FR series modular matrices
User's Manual
Example
Example
Page 111 / 137
Advertisement
Table of Contents
