Preset Operations - Lightware MX-FR9 User Manual

Hide thumbs Also See for MX-FR9:
Table of Contents

Advertisement

Locking outputs
Outputs can be locked to any input. After locking an input to an output, no switching is
permitted to this output unless it is unlocked again. If output lock is active, the color of the
button's background changes to red.
Info: Loading a preset does not change either the lock state or the switch state of a locked
output. If an output is locked to an input before preset loading it will also be locked to that
input after preset loading, so locked outputs ignore the preset.
6.3.6.

Preset operations

Preset operations can be done on the PRESET panel. The panel can be accessed by
clicking on the arrow at the right margin of the software window.
Each Lightware matrix switcher has 32 preset memories that can
be loaded and saved at any time.
Info: A preset setting stores a full configuration of all outputs, so preset
loading have an effect on every output, except the locked ones.
Load preset
Step 1. Open the Preset panel on the right of the Control menu.
Step 2. Select the preset memory (Preset1...Preset32) you want
Step 3. Press LOAD PRESET button or right click on the desired
Step 4. The new I/O configuration is displayed on the matrix
Save preset
Step 1. Make the desired crosspoint connections on the matrix
Step 2. Select the preset memory (Preset1...Preset32) where you
Step 3. Press SAVE PRESET button or right click on the preset and click Save in the
Step 4. A confirmation message comes up. Click YES to save the current crosspoint
Preview preset
Step 1. Right click on the desired preset, and click
Step 2. The preset's I/O configuration is displayed on
Page 70 / 137
to load as the next crosspoint configuration.
preset, and click Load in the popup menu. Now the preset
is loaded.
switching area.
switching area.
want to save your current crosspoint connections.
popup menu.
connections to the selected preset memory. The preset is stored.
Preview in the popup menu.
the matrix switching area with yellow squares
for two seconds.
Section 6. Software control – Using Lightware Matrix Controller

Advertisement

Table of Contents
loading

Table of Contents