Table of Contents
Advertisement
6.5.3. Easy EDID Creator
Since the above mentioned advanced editor needs more complex knowledge about
EDID, Lightware introduced a wizard like interface for fast and easy EDID creation. With
Lightware Easy EDID Creator it is possible to create custom EDIDs in four simple steps.
By clicking on the wizard icon, the Easy EDID Creator opens in a new window.
For further information, see the user's manual of Easy EDID Creator.
6.6. Terminal menu
This general purpose terminal is intended mainly for test and debug purposes. After a
successful connection is established with a router this terminal can be used either via
serial RS-232, TCP/IP LAN or USB connection. All commands can be used here that are
discussed in the programmer's reference. The command text can be typed directly.
By default commands are automatically surrounded by framing brackets. Every sent
command and every received response gets an arrow (-> or <-) prefix, and has different
font colors in order to help distinguishing.
The timecode in every row shows the exact time when the command was sent or the
response received.
If the "Command framing" checkbox is unchecked, you can send multiple commands
together, however in this case you have to type in the framing brackets manually.
Section 6. Software control – Using Lightware Matrix Controller
Figure 6-14. Terminal window
MX-FR series modular matrices
User's Manual
Page 95 / 137
Advertisement
Table of Contents
